Enhancement of the Corrosion Resistance of Steel in Reinforced Concrete and Mortar Properties Using Carbon Nanotubes

Faculty Engineering Year: 2016
Type of Publication: ZU Hosted Pages:
Authors:
Journal: 5th international conferencecorrision mitigationand surface technology 5th international conferencecorrision mitigationand surface technology Volume:
Keywords : Enhancement , , Corrosion Resistance , Steel , Reinforced Concrete    
Abstract:
This paper investigates the effect of nanomaterial on the mechanical properties, microstructures and corrosion of embedded steel bars in cement mortar. Different types of cement mortar mixes with changing the percentage of nanocarbon tube by weight of cement were used. In the experimental program, several mixes containing cement, natural sand, water, and carbon nanotubes with percentages 0, 1, 2, 3, 4, 5% by weight of cement were tested. Compressive strength of cement mortar, sorbitivity, corrosion of embedded steel bars, and microstructure were investigated. The results showed that the using of nano carbon tubes has modified some properties of cement mortar such as, increasing the compressive strength of cubes about 42% at 2% of nanotube, increased the resistance of corrosion, and decreased the porosity of cement mortar.
   
     
 
       

Author Related Publications

  • Mahmoud Abdelhak Hassan Khater, "EFFECT OF STEEL FIBERS ON FLEXURAL BEHAVIOR OF ULTRA HIGH PERFORMANCE R.C. BEAMS", EIJEST, 2013 More
  • Mahmoud Abdelhak Hassan Khater, "Mechanical Properties ofUltra-High Performance Fiber Reinforced Concrete", IJEIT), 2014 More
  • Mahmoud Abdelhak Hassan Khater, "Effect of Steel Fibers on Behavior of Ultra High Performance Concrete", UHPC, 2016 More
  • Mahmoud Abdelhak Hassan Khater, "Strengthening of RC Shallow T-Beams with Shear Zone Large Openings Using CFRP and BFRP sheets: Experimental Study", International Journal of Scientific Engineering and Applied Science, 2017 More
  • Mahmoud Abdelhak Hassan Khater, "Analysis of Reinforced Concrete D-Regions Using Strut-and-Tie Model", المجلة المصرية الدولية للعلوم الهندسية والتكنولوجيا, 2016 More

Department Related Publications

  • Elsayed saad Abdelsalam Salman, "H. M. Emam and S. Abdel Salam “STRESS DISTRIBUTION AROUND TWO ADJACENT EQUAL ELLIPTICAL TUNNELS”, Proceeding of 1St. Conf. for Theory. And Applied Mechanics, Academy of Science. Research & Techy. (ASRT), Cairo 16-18 Dec. 1980.", Proceeding of 1St. Conf. for Theory. And Applied Mechanics, Academy of Science. Research & Techy. (ASRT), Cairo, 1980 More
  • Elsayed saad Abdelsalam Salman, "S.Abdel Salam , M. Kamal , Hosain B. , Loay . A., “ PERFORMANCE OF REPAIR METHODSIN COASTAL STRUCTURS”, Proceedings of 8th Arab Structural Eng. Conference, Cairo University, Cairo Egypt, October, 2000.", Proceedings of 8th Arab Structural Eng. Conference, Cairo University, Cairo Egypt,, 2000 More
  • Elsayed saad Abdelsalam Salman, "G. Attia, H.Osman, S. Abdel Salam, A. Kheder “DYNAMIC ANALYSIS OF STRIP FOOTING”. 10th Internal. Colloquium On structural and Geot Eng. 22-24 April 2003, Ain shams Univi, Cairo, Egypt.", 10th Internal. Colloquium On structural and Geot Eng. 22-24 April 2003, Ain shams Univ Cairo, Egypt., 2003 More
  • Alaaeldeen Abdelkader Mohamed Abdelazziz, "Structural behavior of hybrid CFRP/steel bolted staggered joints", Elsevier, 2018 More
  • Mohammed Reda Ali Elewa, "Effect of sustained loading and environmental conditions on the creep behavior of an epoxy adhesive for concrete structures strengthened with CFRP laminates", elsevier, 2017 More
Tweet