Flow and Heat Transfer over Shallow Cavities

Faculty Engineering Year: 2010
Type of Publication: ZU Hosted Pages: 8
Authors:
Journal: International Journal of Thermal Sciences Elsevier Volume: 3
Keywords : Flow , Heat Transfer over Shallow Cavities    
Abstract:
The flow over a shallow cavity heated with constant heat flux form the bottom side has been studied experimentally and numerically. In the experimental part, pressure coefficient and Nusselt number have been measured along the cavity floor. In the numerical simulation, the conservation equations of mass, momentum, and energy have been solved. The standard (k–) turbulence model is used to account for the turbulent fluctuations. In both experimental and numerical part, the effect of changing cavity aspect ratio and Reynolds number has been studied. It is found that, a single elongated eddy has been formed for aspect ratio lower than (7). As the aspect ratio increases the flow impinges with the cavity floor creating two eddies, one beside the upstream cavity side and the second beside the downstream cavity side. Local Nusselt number along the cavity floor is affected mainly by the flow structure inside the cavity and the average Nusselt number has increased with increasing the aspect ratio up to (10) and with increasing Reynolds number. A correlation for the average Nusselt number, as a function of Reynolds number and cavity aspect ratio, is developed.
   
     
 
       

Author Related Publications

  • Saliem Abdelaziz Saliem Anose, "Role of hybrid nanoparticles on thermal, electrical conductivity, microstructure, and hardness behavior of nanocomposite matrix", Elsevier B.V., 2021 More
  • Saliem Abdelaziz Saliem Anose, "Numerical Investigation of Flow and Heat Transfer over a Shallow Cavity: Effect of Cavity Height Ratio", MDPI, 2021 More
  • Saliem Abdelaziz Saliem Anose, "Thermodynamic Analysis of Partitioned Combined Cycle using Simple Gases", MDPI, 2019 More
  • Saliem Abdelaziz Saliem Anose, "Investigation of the Aerodynamic Effect of the Interfering Gap between Uncommon Towers", Cairo University, 2008 More
  • Saliem Abdelaziz Saliem Anose, "An Experimental Study on Pressure Drop and Heat Transfer in a Rectangular Channel with Staggered Detached Rib Arrays", Faculty of Engineering, Ain Shams University, 2006 More

Department Related Publications

  • Mohammed Anwar Mohamed Ali Ismaeil, "Transmission electron microscopy of carbon-coated and iron-doped Titania nanoparticles.", Nanotechnology, 2016 More
  • Mohammed Abdelhamied Ahmed Boraee, "A Hydro-Kinematic approach for the design of compact corrugated plate interceptors for the de-oiling of produced water", Elsevier, 2018 More
  • Tarek Mohamed Mohamed Khas, "Combustion and mass loss behavior and characteristics of a single biomass pellet positioning at different orientations in a fixed bed reactor", Springer, 2023 More
  • Reda mohammed gad ragab, "An Experimental Study of Mist/Air Film Cooling With Fan-Shaped Holes on an Extended Flat Plate: Part 2 — Two-Phase Flow Measurements and Droplet Dynamics", ASME, 2014 More
Tweet