Evaluation of Steel I-beam strengthened by various plating methods

Faculty Engineering Year: 2006
Type of Publication: ZU Hosted Pages:
Authors:
Selem Saleh Elsayed Ahmed Dawod
Journal: Journal of advances in structural Engineering. Volume 9 No. 4 2006, PP 535-544 Journal of advances in structural Engineering. Volume 9 No. 4 2006, PP 535-544 Volume:
Keywords : Evaluation , Steel I-beam strengthened , various plating    
Abstract:
To up-grade steel I-beams, steel plates and carbon fiber reinforced polymer (CFRP) plates/sheets were bonded to the tension side of the I-beams, IPE 160 ( tweb = 5 mm, tfl = 7.4 mm, b = 82 mm and h = 160 mm). In some cases, steel plates wer
    
     
 
       

Author Related Publications

  • Selem Saleh Elsayed Ahmed Dawod, "Mechanical properties of sustainable concrete comprising various wastes", Springer, 2023 More
  • Selem Saleh Elsayed Ahmed Dawod, "Mechanical behavior of concrete at different levels of compressive strength", Fourth International Conference On Civil And Architecture Engineering, 2002 More
  • Selem Saleh Elsayed Ahmed Dawod, "Correlation the effect of beam size and crack-depth ratio in concrete by using a modified stress intensity factor", Al-Mansoura Engineering International Conference, --- , Sharm Elsheikh, EGYP, 2003 More
  • Selem Saleh Elsayed Ahmed Dawod, "Mechanical behavior of high strength concrete reinforced by different types of fibers", Al-Azhar Engineering Seven International Conference, April 2003, Cairo, EGYPT., 2003 More
  • Selem Saleh Elsayed Ahmed Dawod, "Sulfate attack on concrete from mixing and curing water", Al-Azhar Engineering Seven International Conference, April 2003, Cairo, EGYPT., 2004 More

Department Related Publications

  • Selem Saleh Elsayed Ahmed Dawod, "Mechanical behavior of concrete at different levels of compressive strength", Fourth International Conference On Civil And Architecture Engineering, 2002 More
  • Selem Saleh Elsayed Ahmed Dawod, "Effect of fiber type and ratio on the flexural behavior of RC slabs under static load", AEIC 13, 23-25, - 12 - 2014, 2014 More
  • Amro Shehata Mohamed Shehata Fayed, "Stress intensity factors of a central slant crack with frictional surfaces in plates with biaxially loading", International Journal of Fracture, 2004 More
  • Khalied Abdelaziz Mohamed Ali Attia, "Metallurgical and Mechanical Properties of Heat Treatable Aluminum Alloy AA6082 Welds", Research India Publications, 2017 More
  • Hisham Mohamed Ibrahim Alemam, "Composite Patch Configuration and Prestraining Effect on Crack Tip Deformation and Plastic Zone for Inclined Cracks", ASCE, 2016 More
Tweet